MSS Sanitation QAC QAC-Based Sanitation Agent 20 L (19.60 KG)

MSS^®-WBC Foamgraset | Foaming Dirt and Grease Remover

WBC-Foamgraset is a water-based, concentrated cleaning agent formulated to remove tarred oil, grease, and heavy dirt layers. It offers a safe alternative to flammable and hazardous solvents such as gasoline, petrol, or diesel. Thanks to its powerful formula, it provides deep hygiene on all water-resistant surfaces without causing rust.

Key Advantages
Powerful and Safe: Non-flammable; safe to use in industrial environments and kitchens.

Environmentally Friendly: Biodegradable, phosphate-free, and environmentally friendly.

Multipurpose Solution: Effective in all areas, from floors and walls to machine equipment, kitchen grills, and ventilation systems.

Corrosion Inhibitor: Despite its water-dilutable nature, it does not cause rust on metal surfaces.

Economical: Thanks to its concentrated formula, it can be diluted with water for long-term and low-cost use.

Technical Details and Product Information
Feature Details
Appearance: Liquid (Contains paint)
Composition: Alkaline substances, silicates, surfactant and water-miscible solvent
pH (10% solution): 10.0 pm±1.0 (Alkaline)
Specific Gravity: 1 pm± 0.1 g/cm³
Property: Water-based, non-flammable, foaming degreaser
Application Area: Industrial floors, machinery, kitchen equipment (oven, grill, fan)
Usage Instructions and Application Protocol
WBC-Foamgraset can be applied manually or with a foam applicator, diluted according to the degree of contamination:

Dilution: * Daily Cleaning: 1 unit of Foamgraset is mixed with 4 units of water.

Heavy Contamination: The product ratio can be increased depending on the intensity of the contamination.

Application (with Foam Applicator): The prepared solution is sprayed onto the surface and left for a few minutes to dissolve the dirt.

Cleaning: Dissolved oil and dirt are removed by wiping with a clean cloth. Light scrubbing may be necessary for very heavy layers.

Rinsing: Any remaining chemical residue should be removed from the surface with clean water.

Important Warnings and Storage
Surface Test: As it is a very effective solvent, it is recommended to test on a small area before using on painted surfaces.

Material Sensitivity: May leave stains on contact with glass and anodized aluminum. In case of contact, rinse immediately with plenty of water.

Safety: Class Irritant (Xi); avoid contact with eyes and skin.

Storage: Should be stored in its original packaging at temperatures between 20°C and 50°C.

Quality Certificates: Manufactured in accordance with ISO 9001, 14001, 22000 and OHSAS 18001 standards.