Tags
Viewed products
New product
200 Item Items
Warning: Last items in stock!
Availability date:
| Package Dimensions (Cm) | 38x31x31 Cm |
| Order Selection | You can order by quantity or by the box. |
| pH Değeri | Alkali |
HEMERA Ceramix is a special cleaning agent with high alkalinity that can be safely used on all types of floors and surfaces that have been compressed, fired, and glazed.
Key Advantages
Penetrating Power: Reaches the deepest points of rough and porous floor tiles and ceramics, dissolving trapped dirt.
Easy Dirt Removal: Allows for effortless removal of softened dirt from the floor with the help of a scrubbing brush.
Wide Range of Application: Effective on granite, fired hard floor tiles, and all water-resistant ceramics in indoor and outdoor spaces.
Glazed Surface Friendly: Provides cleaning and hygiene without damaging the structure of glazed surfaces.
Technical Details and Product Information
Feature Details
Appearance: Yellow liquid
pH Value 12-13 (High Alkaline)
Composition: Anionic/Nonionic surfactants (<5%), alkaline substance, complexing agent and solvents
Packaging: 5 L (5.13 KG)
Consumption Guide (per m²)
Daily Cleaning (Wet Wiping): 0.50 ml/m².
Basic Cleaning: 40 ml/m².
Instructions for Use
1. Daily Cleaning
Applied by wet wiping or with cleaning machines.
Dosage: Depending on the intensity of the contamination, 80-300 ml of Hemera Ceramix should be added to 8 liters of water.
2. Basic Cleaning
Performed with polishing machines or cleaning machines.
Dosage: Depending on the intensity of the contamination, add 400-800 ml of Hemera Ceramix to 8 liters of water.
Application: Spread the prepared 8-9 liter solution over an area of approximately 25 m². Wait 5 minutes, scrub with a brush, vacuum, and then rinse with clean water.
Critical Warnings and Safety
Surfaces Where It Should Not Be Used: Absolutely do not use on natural and synthetic surfaces containing CaCO₃ (calcium carbonate), such as marble, and on linoleum.
Polish Warning: It is recommended not to use polish on granite and glazed floors.
Foam Control: A foam suppressant should be used to control foaming that may occur in the dirty water tank of cleaning machines.
Safety: Irritates the eyes. Use gloves during application and avoid eye/skin contact.
Quality Certificates: Approved by the Ministry of Health. Manufactured according to ISO 9001, 14001, 22000 and HACCP standards.