TABNAK Crystal Crystallizer Polish (Marbel, Travertine, Natural Stones) 5 L (5,55 KG)

MSS®-TABNAK Crystal | Crystallized Polish for Marble and Natural Stones

TABNAK Crystal is a special crystallized polish that hardens surfaces containing calcium carbonate, such as marble and travertine, making them resistant to wear and giving them a natural shine.

Key Advantages
Natural and Lasting Shine: Thanks to its crystallized properties, it provides a long-lasting and eye-catching shine without altering the natural structure of the stone.

Surface Hardening: It hardens surfaces, preventing wear and tear, and creates a dirt-repellent and non-slip surface.

Economical and Easy Maintenance: It does not require frequent removal, is easy to repair, and is very economical as it provides long-term protection.

Easy Cleaning: Daily maintenance and cleaning of polished surfaces become extremely easy.

Technical Details and Product Information
Feature Details
Appearance: Transparent liquid
pH Value: 1-2 (Acidic - Necessary for crystallization)
Composition: Silicate (> 10%) and special auxiliary substances
Packaging: 0.75 L - 5 L (0.83 Kg - 5.55 KG)

Consumption Guide (per m²)
Application: Average 5 ml / m² per coat.

Areas of Use
Suitable for: Marble, travertine, natural stone floors and tiles.

Not Suitable for: Should not be used on granite, quartz, tiles, terrazzo, ceramic and earthenware surfaces.

Application Guide (Crystallization System)
Before application, the floor must be thoroughly cleaned with Hemera Stripper or Stripper-L, clean and completely dry.

Preparation: Pour the product into a spray bottle and shake well before use.

Spraying: Spray a small amount of Tabnak Crystal onto an area of ​​approximately 1 m².

Machine Polishing: Before the polish dries, go over the surface with a polishing machine (140-800 rpm) fitted with a steel wool pad until it shines.

Pad Maintenance: When the steel wool pad starts to get wet, flip it over or replace it with a new one.

Final Cleaning: After finishing the entire area, remove any remaining fine dust and metal particles with a soft pad or dry acrylic mop.

Safety and Protection Warnings
Corrosive: May cause serious burns; harmful if swallowed.

Personal Protection: Always wear gloves, protective goggles, and a mask during application.

Skin/Eye Contact: Avoid contact with eyes and skin; if contact occurs, rinse thoroughly with plenty of water.

Environment: May be harmful to aquatic organisms; avoid uncontrolled discharge into the environment.